BRESSER MyTime Meteotime LCD Wall Clock

The BRESSER MyTime Jumbo LCD weather wall clock is the ideal weather wall clock for the office or other large rooms. With its 9 cm high numbers the time can easily be read even from a greater distance and from almost any position in the room. The setting of the time as well as the change to daylight saving time is done automatically via the DCF time signal (CET). Apart from that with the weather wall clock you can also always keep an eye on the temperature and humidity and you even get a weather forecast for the following 12 to 24 hours.  PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, it also offers manual time setting in case it is used in a different time zone.FEATURESJumbo display 330 x 185mmRadio controlled clock (automatic setting of time and clock change) AlarmInside and outside temperature Humidity12-24 hours weather forecast Includes wall mounting and fold-out standSCOPE OF DELIVERY1x weather wall clock1x outdoor sensor1x manualREQUIRED BATTERIESStation: 4x AASensor: 2x AAA

More than just a clock!The BRESSER LCD radio controlled wall clock with weather forecast does not only show the time but also your regional weather forecast transferred by the Swiss weather service METEOTIME.A feature of this model that stands out is the large display: the time is displayed with a font size of 6.5cm and thus can also be read well from the distance. The time is received automatically via DCF time signal (CET) . Also the clock change is done automatically, so you don't have to worry about it. A detailed 4 day weather information is shown on a separate LCD. There are up to 470 cities / regions selectable for fetch of the weather data, which can be shown for day and night. Like all BRESSER 4Cast models also this wall clock is equipped with the METEOTIME system with a precise Europe wide 4 day forecast for your region. Also current weather warnings are shown by the clock and inform the user about potential risks.Thanks to the fold-out stand this radio controlled clock also looks very good on your desk.The METEOTIME system does NOT cause any additional costs!FEATURESradio controlled wall clock with DCF atomic clock time signal receiver thermo/hygro sensor (433 MHz) 4 day forecast provided by a weather service current weather warnings from the weather service 8 control elementsinside temperature: °Coutside temperature: °Cregional temperature: °Cprobability of precipitation (in %)battery powered (station: 3x AA; sensor: 2x AAA; not included)SCOPE OF DELIVERYwall clockoutdoor sensormanual

The BRESSER MyTime io NX wall clock shows the time, transferred by a time signal, also the inside temperature, outside temperature as well as the relative humidity and the weather trend. The wireless outdoor sensor enables the transmission of the outside temperature up to a distance of 30 m (outdoors). The setting of the time as well as the change to the daylight saving time is done automatically via the DCF time signal (European Central Time). Additionally, the weather wall clock also permanently displays temperature and humidity. Thanks to the noiseless clockwork with sweeping second hand this clock makes no annoying sounds. The clock is not suitable for outdoors or in bathrooms. FEATURES 30 cm wall clock for indoors Radio controlled clock (self setting; automatic setting of daylight saving time) Brushed stainless steel frame Noiseless operation Inside and outside temperature Relative indoor humidity in % SCOPE OF DELIVERY 1x weather wall clock (3x AA batteries required, not included) 1x outdoor sensor (2x AAA batteries required, not included)

Stay on top of the weather! The BRESSER Wi-Fi HD TFT 7-in-1 Professional Weather Station displays the temperature, humidity, wind speed and more. The HD TFT screen shows the comprehensive data from the 7-in-1 external sensor and up to 7 additional sensors (not included) in a wide variety of display modes. Easily switch between the start screen, detailed display, data log and more at the touch of a button! Thanks to the intuitive step-by-step interface, you can choose which measurements you want to view and how long you need them, either in a light or dark display design. Wi-Fi weather station: no more getting caught in the rain! No one likes to arrive at an important meeting soaking wet or get sunburned while working in the garden. With this weather station, you can do a quick weather check before leaving the house. The start screen shows you all up-to-date weather data, including a reliable graphic weather trend forecast, the UV level and the light intensity. It also displays the 'Feels-like' temperature, which is particularly practical for people who are sensitive to the weather. This function shows you how warm or cold it feels outside, based on your local measured values for wind, temperature and humidity. Other standard weather readings such as precipitation amount and rate, air pressure, wind speed and wind direction can also be found on the intuitive display. The Wi-Fi weather station for more than just the here and now The weather station shows a wide range of readings, including temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. But what about weather trends? After all, you can only decide whether the garden hose needs to be rolled out again if you know the amount of rain that has fallen in the past few hours. The detailed display adds a wealth of measurements to the start screen, such as the amount of rain during the last hour, 24 hours and the last month.However, when it comes to your local weather history, the weather station can do much more: You can also check the daily max. and min. values on the display, either in a table or a graph. If this isn't detailed enough, you can use the data log function, which records measurements at intervals of 5, 10 or 30 minutes. Perfect for hobby meteorologists who want to immerse themselves in data on the display or on their own computer! View your weather data in more rooms with additional sensors The weather station comes with a 7-in-1 sensor and a thermo/hygro outdoor sensor. However, sometimes two wireless sensors are just not enough. Do you ever struggle with mildew in your kitchen or bathroom? Have you ever turned up the heating in winter, only to discover that the air literally dries out? Regardless of the answer, it's always worth keeping an eye on the indoor climate in different rooms. If you have an outdoor pool, you can use a pool thermometer (not included) to check that the water is at an optimal temperature. For all this and more, you can connect up to 6 optional additional sensors to the base station of the Wi-Fi weather station. Just look in the Accessories tab to view a list of compatible devices. Once you've connected all the wireless sensors, the measurements are shown side by side on an intuitive start screen, which allows you to read and compare the temperature and humidity readings and trends for your kitchen, bedroom, or other rooms. You can also check the soil moisture and temperature with an optional soil sensor (not included). In addition, you can give each sensor a name to ensure that you keep track of the different locations. Smart technology In today's world, everything is networked. The weather station also has a number of connectivity functions to allow you to stay on top of the weather. You can register your new weather station with our partner, the German weather platform AWEKAS, free of charge. The weather station also supports the popular international platforms ProWeatherLive, Weather Underground and Weathercloud. You can also connect your weather station to your other favourite sites. This allows you to access the local measurement data from your Wi-Fi weather station from anywhere in the world. If you worry about your garden when you go on holiday, you can go online to check the weather conditions back home, and then ask your neighbours or friends to water the plants. If you have a smart home, you can also water your plants automatically. Simply use AWEKAS to transfer your measurement data such as temperature, humidity, wind speed and amount of precipitation directly to your smart home control unit. For example, you can set up your lawn sprinkler to be activated automatically when the lawn is dry, or configure your house to maintain an optimal indoor climate. Simply go to the following link and connect your weather station to AWEKAS: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ Built-in clock and alarm In addition to the local weather, the HD TFT display also shows you the time, day of the week, date and moon phase. Too early, or time to get up? Just take a look at the bottom of the screen! The weather station also helps you to decide what to wear for the day ahead: wake up to the built-in alarm and use the weather trend forecast to choose the right outfit. There is also a special feature for icy weather: if you activate the frost alarm, the alarm clock will ring 30 minutes earlier on icy days. In addition, the Wi-Fi weather station calculates and displays the local times for sunrise and sunset, as well as for moonrise and moonset. Keep on top of the weather with the Wi-Fi HD TFT 7-in-1 professional weather station! BASE STATION FEATURES 7-inch HD TFT display with various display modes Multi-channel overviews for displaying all live data from the wireless sensors Transmits data to the German weather platform AWEKAS via Wi-Fi Publish weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud and 1 additional user-defined platform) Displays the weather trend as a graphic (24 hours / 30 days) Historical data log, exportable to USB drive (not included) Indoor temperature (°C/°F) and humidity with trend Displays the outdoor temperature (°C/ °F) and humidity with trend Displays the amount of precipitation (current, last hour, last 24 hours, last month) Gusts and average wind speed Colour indicator for the wind speed level Displays the Beaufort scale (scale for classifying the wind speed) Displays the wind direction (current and predominant, 16 directions) Displays UV level Displays light intensity Weather forecast Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Maximum/minimum value memory (daily/total) Weather data calibration High/low alarm function Individual naming of the additional sensors Synchronization with Internet UTC time with time zone selection Alarm clock with volume control and ice/frost warning Time, calendar, day of the week and moon phase display Sun-/moonrise, sun-/moonset Choose between dark or light display Display brightness and contrast can be customized, day and night mode 6 selectable display languages (EN, DE, FR, IT, ES, NL) Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system) Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: power adapter, 1x CR2032 back-up battery (included) Dimensions: 190 x 140 x 19.5 mm / Weight: 325 g FEATURES OF 7-IN-1 OUTDOOR SENSOR Measures the outdoor temperature and outdoor humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Transmission range of up to 150 metres Place in an unobstructed location in order to obtain accurate sunlight and rain data Can be mounted on a wall or post with the supplied adapter Power supply: 3x AA batteries (not included), additional solar panel to extend the battery life Dimensions: 225 x 170 x 410 mm / Weight: 533 g THERMO-HYGRO SENSOR FEATURES Measures the temperature and humidity Transmission range of up to 150 metres Power supply: 2x AA batteries (not included) Dimensions: 60 x 113 x 39.5 mm / Weight: 126 g DELIVERY CONTENT Base station with power adapter 1x wireless 7-in-1 professional weather sensor 1x Thermo/hygro sensor 1x CR2032 back-up battery Manual